Operating Instructions

Countdown

The countdown operates independently and can therefore be set when the oven is switched on as well as switched off.

Setting the Countdown

01. Press the “CLOCK” C button.

2. Set the time required within

5 seconds using the + and - buttons.

When the time set on the count- down has expired, an acoustic signal sounds for approx. two minutes.

3.Press the “CLOCK” C button to switch off the signal.

Changing the Setting on the Countdown

01. Using the “CLOCK” C button, re-select the time set on the countdown.

2. Set the new time required within 5 seconds using the + or - buttons.

Switching Off the Countdown Early

01. Using the “CLOCK” C button, re-select the time set on the countdown.

2.Within 5 seconds set the time required to "0" using the - button.

Checking the Countdown Setting

A few seconds after the countdown has been set, the time display indi- cates the current time again. You can check the amount of time left on the countdown at any time.

01. Using the “CLOCK” C button, re-select the time set on the countdown. The time remaining on the countdown is displayed.

Changing the Signal Tone

The frequency of the signal tone can be set to 3 different tones.

0 1. Press the - button until the changed signal tone sounds and release. The frequency is set to the next level.

2.Press the - button again until the changed signal tone sounds and release.

The frequency is set to the next level.

22

Page 22
Image 22
AEG B 4100 operating instructions Countdown, Changing the Signal Tone