AEG FM 4803K-AN manual Remove the aluminium panels from the hobs

To optimise joints between the installed hobs, the gap between the ceramic hob may be grouted with silicone:

1.Remove the aluminium panels from the hobs.

2.Apply a stripe of silicone to the gap between the two ceramic hob. Use only the silicone supplied, as it is designed to tolerate the appliance’s high temper- ature. (Fig. 1)

3.Splash a little soapy water (washing-up liquid) on the silicone stripe

4.Press the rubber block hard against the ceramic hob and pull it slowly from back to front (Fig. 2)

5.Leave the silicone to harden until the next day.

6.Remove surplus silicone coating from the ceramic hob with the razorblade supplied. Be careful not to damage the silicone in the gap. Run tools only along the joint, never across it.

7.Polish the ceramic hob with the supplied cleaning product for ceramic hobs.

1

2

34