What to do if...
If the appliance is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre.
IMPORTANT: If you call out an engineer to a fault caused by incorrect use or installation, a charge will be made even if the aookuabce is under guarantee.
Problems | Remedy |
|
|
The hob doesn’t work | Check that the hob is switched on. |
| Check the HPFI/HFI relay in the |
| main fuse box. Check the fuses for |
| the hob. |
The hob gets hot.................
The fuses are constantly blow-
ing.....
The hob may get as hot as 60°C.
Possibly, you have too many electri- cal appliance in use at one go. If your hob is connected to a 10 Amp fuse group, there is a high risk of overload.
The zones make clicking and other noises
During use there will be noise from the induction coil and the fan. This is completely normal and has no effect on cooking performance.
However, some pans can increase the noise. If the noise becomes a nui- sance, one option could be to use a different pan.
At the low heat settings, clicks will be heard. These occur when the heat is being switched on and off. This is completely normal and has no effect on cooking performance.
36