Cutting Out
When mounting this unit: Read the instructions on this page. When mounting the hob together with other units: Read the instructions on the next page.
For mounting the hob you need a Philips screwdriver and the 4 clamp- ing fittings supplied with this prod- uct (see fig.).
Distance to Wall:
Minimum 150 mm to flammable material. Minimum 50 mm to non- flamable material.
1.Cut a hole in the table top according to the measures stated. See “Technical data”,
2.Place the unit upside down on a mat. Take care that the top side is not scratched.
3.Mount the clamping fittings in the holes in the side of the base panel (see fig.)
4.Place the unit in the hole and tighten the clamping fittings to the table top using a screwdriver.
Clamping fittings
Mounted clamping fittings
31
