ProblemsRemedy
The zones won’t turn on. The dis- play shows:
Child safety has been activated. You
can either press the jbutton at the same time as you make a selection, or you can cancel the child safety device,
see Section “How to use .. Child safety”.
The zones won’t turn on and the display shows:
The display is flashing “F”.
If the rear zone is set to levels 8 or 9 while the front zone is set to Power, the front zone will revert to level 9.
Autostop has been activated. Touch the
kbutton. The hob is now ready for
use.
Check whether the zones are suffi- ciently covered by the pan. See the section “How to use...Suitable pans”
Check that the pans are suitable for induction. See the section: “How to use...Suitable pans” If “F” still flash- es, contact service. See section “Service and spare parts”.
The front and rear zones are connect- ed. If you wish to use setting 8 or 9 on the rear zone, the front zone cannot be set higher than level 9. Power will automatically be turned off.
Please note that it will be necessary to provide proof of purchase for any
antee service calls. | 37 |
|