Aga Ranges DESN 512387 A owner manual Splashback, To Adjust Pan Support Level, Handrail Fitting

Fig. 8C DESN 513716

TO ADJUST PAN SUPPORT LEVEL

1.Loosen retaining nut using 8mm spanner. (See Fig. 8C).

2.To prevent rocking adjust the pan support foot using 2.5mm allen key.

3.Check pan support is level with opposing pan supports.

4.Retighten retaining nut.

HANDRAIL FITTING

1.Position handrail assembly onto locating studs at each end of facia. Ensure the grub screw at each end of the hand rail is facing downwards.

2.Push handrail assembly fully against facia and lock in place by tightening 2 grub screws (2 1/2 mm). (See Fig. 6A).

SPLASHBACK

1.Locate tabs on rear of splashback assembly, into the brackets on the upper rear of the cooker. (See Fig. 9).

Push fully into place.

Fig. 9 DESN 512394

17