Aga Ranges F107411-01 manual To Remove Oven Light Switch, To Remove Oven indicator neon Light

SERVICING  WARNING

Disconnect from electricity before servicing. Check appliance is safe when you have finished.

9. To Remove Oven Light Switch

Remove control panel (see 8).

NB The old switch may be destroyed during removal.

Remove switch button and old switch from its bezel by gripping the switch body behind the control panel and twisting sharply

The switch bezel can then be removed by folding back its locking ‘wings’ and pushing forward. Fit the new bezel to the control panel by first lining up the raised key on its body with the cut-out in the control panel and pushing it in from the front. Assemble the new switch to the bezel by lining up the key sections and pushing home. Fit the new button by pushing in from the front.

Replace control panel in reverse order and test for correct operation.

10.To Remove Oven indicator neon Light

Remove control panel (see 8).

NB The old indicator neon may be destroyed during removal.

Disconnect the wires from the rear of the neon. The light can then be removed by folding back its locking ‘wings’ and pushing forward. Fit the new light to the control panel by first lining up the raised key on its body with the cut-out in the control panel and pushing it in from the front.

Replace control panel in reverse order and test for correct operation.

11.To Remove Electronic Timer

Turn off the power at the circuit breaker.

Pull off the timer control buttons and remove the control panel (See 8). Remove the timer/mounting bracket assembly from the control panel by removing the two fixing screws. Remove the timer from its mounting bracket by depressing the plastic lugs on the timer case, at the same time pulling the unit forward.

Reassemble in reverse order. When replacing leads refer to the wiring diagram. Check operation of timer.

17