SERVICING WARNING
Disconnect from electricity before servicing. Check appliance is safe when you have finished.
4. To Lift up the Ceramic Hob
Pull the range forward.
Pull off the push fit control panel end caps at each end and remove the end fixing screws under the end cap.
Remove the lower front retaining screws (one each side) situated beneath the lower edge at the front corners of the side panels.
Swing the side panels to gain access to the hob
fixing screws (1 each side) at the top front of the side uprights. Remove these screws.
Caution
The ceramic hob material is much more sensitive to scratches on the underside than the top.
Take care not to touch or scratch the underside of the ceramic as this will weaken the material and cause the top to shatter.
Lift up the ceramic hob at the front and prop in position with a
14