SERVICING WARNING
Disconnect from electricity before servicing. Check appliance is safe when you have finished.
7. To replace the cooktop neon indicator lights pack
Lift up the ceramic hob see section 4.
The neon indicator light pack is held to the support bracket by two clips.
Either: -
Release the pack from the support by freeing the pack location clips from the bracket.
Or
Remove the mounting screws of the support bracket, and release the pack from the support
Disconnect the wiring, noting the colors and connection positions.
Fit the replacements pack and reassemble in reverse order.
Check that the replacement lights work.
bracket fixing screws
neon pack locaction clips
8. To Remove the Control Panel
Turn off the power at the circuit breaker.
Remove the handrail by first removing the 2 plastic screw cover plugs and then the end bracket fixing screws beneath the plugs.
Remove the two screws that were hidden beneath the hand rail end brackets.
Pull off the push fit control panel end caps at each end and remove the end fixing screws under the end cap.
Pull off all the control knobs. Open the broiler and oven doors and remove the control panel fixing screws underneath the control panel. The screws directly below the clock are for the clock fixing bracket - don’t remove them at this stage.
Lift the control panel, pull forward and disconnect the wiring from the rear.
Reassemble in reverse order. When replacing leads refer to the wiring diagram. Check operation of timer.
16
