Aga Ranges F107411-01 To Remove an Oven Inner Back, To Replace an Oven Fan, Servicing  Warning

SERVICING  WARNING

Disconnect from electricity before servicing. Check appliance is safe when you have finished.

22.To Remove an Oven Inner Back

Open the oven door.

For the left hand oven unscrew the 2 thermostat phial fixing screws. See section 12 ‘To Remove a Thermostat’ for more detail on the thermostat phial fixing screws.

Remove the screws that secure the inner back to the oven rear. Lift the removable panel away.

Re-assemble in reverse order. Ensure that the retaining screws are fully tightened.

23.To Replace an Oven Fan

Pull the range forward to access the cover boxes at the rear of the range, see the section ‘How To Move the Range for Servicing’.

Remove the screws that secure the rear cover and lift it clear. Remove the fan wiring, noting the colors and connection positions. Remove the inner back as detailed in Section 22.

Hold the fan blades and undo the centre nut (left hand thread), brass washers, fan blade and Circlip.

Undo the nuts that retain the fan and remove it from the cavity rear.

Fit the replacement and re-assemble parts in reverse order. Check that the oven operates satisfactorily.

24.To Remove an Oven fan Element

Remove the oven inner back as detailed in Section 22.

Remove the screws that secure the element within the oven and lift the element away carefully.

Disconnect the leads noting the colors and connection positions and connect to the replacement element and re-assemble parts in reverse order.

24