U104613-03 24
Using your R ange
When reassembling a Wok burner, turn over the
large base ring and find the ‘D’ shaped area.
Turn the head until the ‘D’ matches the one on the
burner base. Turn the head over and place it on the
burner base.
To fit the small inner burner, find the larger
electrode notch in the burner rim. Line this up with
the white ignition electrode and place the inner
burner on the large base ring.
A electrode notch B ignition electrode
Now fit the two trim rings, making sure that they
are sitting down properly.
BroilerControl Panel and Doors
The control panel and control knobs should only
be cleaned with a soft cloth wrung out in clean
hot soapy water - but take care that no surplus
water seeps into the appliance. Wipe with a clean
dampened cloth then polish with a dry cloth. The
oven doors should only be cleaned with a soft cloth
wrung out in clean hot soapy water.
Models with Main oven window door
The Main oven door is triple glazed but the oven
door front panel can be taken off so that the inside
faces of the glass panels can be cleaned.
If necessary move the range forward to gain access
to the sides of the door (see the ‘Moving the range’
section of these instructions).
The door front panel is held by two fixing screws on
each side.
The fixing screws have a recessed hexagon socket
in the head. A hexagon key to fit the screw is
supplied in the instruction pack.