25 U104613-03
Using your R ange
Cleaning the Broiler
Before you remove any of the broiler parts for
cleaning make sure that they are cool.
The broiler pan and grid should be washed in hot
soapy water. After cooking meats or any foods
that soil, leave to soak for a few minutes in the sink
immediately after use. Stubborn particles may be
removed from the grid by using a nylon brush.
Alternatively the broiler pan can be washed in a
dish washer.
To remove the broiler pan support frame, pull the
broiler pan forward.
Lift the broiler pan clear of the support frame.
The support frame is held to the side rails by two
clips on each side.
For each side, support the side rail with one hand
and with the other hand life the frame up and out
of the side clips.
For safety, push the side rails back into the broiler
chamber.
The side rails can be removed to make cleaning the
broiler
chamber easer by unhooking them from the broiler
chamber sides.
Slides can be wiped clean with soft cloth and mild
detergent.
Do not use any abrasive substance.
DO NOT put the side runners in a dishwasher
When you have finished, hook the side rails back
onto the sides of the chamber. To refit the frame
pull the side rails forward and for each side in turn
support the side rail and press the frame down into
the side rails. Replace the broiler pan.