35
Read all instructions before installing or using this appliance.
Installation Instructions
Save these instructions for future reference.
Moving the Range
The range is very heavy. Take great care.
We recommend two people maneuver the range.
Ensure that the fl oor covering is fi rmly attached,
or removed to prevent it being disturbed when
moving the range around. You will need the leveling
tool.
From the back tilt the range forward and remove the
rear half of the polystyrene base pack.
Repeat from the front and remove the front half of
the polystyrene base.
LOWER THE TWO REAR ROLLERS.
First fi t the leveling tool on the hexagonal adjusting
nut as shown below.
Make 10 complete (360º) turns clockwise. (This
means turning and removing the leveling tool 20
times).
Make sure you lower BOTH REAR ROLLERS. There
are two adjusting nuts, one for each roller, at both
the front bottom corners of the range.

Note the rollers are only intended to aid

installation - the range should not be moved

once it is installed.

Unfold the rear edge of pack base tray. Open the
broiler door and the Tall oven door. Grip under the
control panel and lift the front of the range.
Carefully push the range backwards off the pack
base. Remove the pack base tray. Position the range
close to its fi nal position leaving just enough space
to get behind it.
Do not use the door handles or control knobs to
maneuver the range. Use the cooktop and bowl
areas.

IMPORTANT!

Remove all tape and packaging. Take the accessory
pack out of the oven. Check to be sure that no
range parts have come loose during shipping.