43
Read all instructions before installing or using this appliance.
Installation Instructions
Save these instructions for future reference.
How To Remove the Range for Servicing
Follow these procedures to remove appliance for
servicing:
The range is very heavy. Take great care. We
recommend two people maneuver the range.
Ensure that the fl oor covering is fi rmly attached,
or removed to prevent it being disturbed when
moving the range around.
There are two leveling rollers at the back and also
two screw down leveling feet at the front.
Open the broiler door and right hand oven door so
that you can get a good grip on the bottom of the
control panel as you move the oven.
Do not move the range by pulling the door handles
or knobs. Lift the front slightly and slide the range
forward to disengage from the anti-tip bracket.
Move the range a bit at a time, checking behind it
to make sure the electric cord is not caught. Make
sure the electricity cable has suffi cient slack to
move the range forward as you go along
Disconnect electrical supply to appliance and
unplug the electrical supply cord.
Reverse procedure to reinstall.
If your range is removed for any reason, make sure
the anti-tip device is re-engaged properly when
the range is replaced. Failure to take this precaution
could result in tipping of the range and cause
injury.