Aga Ranges U107501-01 Fit the splash back (optional)

41
Read all instructions before installing or using this appliance.
Installation Instructions
Save these instructions for future reference.
Fit the new end caps to the rear spacer and fl ue
grille and hold in place with the nuts and spring
washers supplied.
If you are not fi tting the splashback the splashback
mounting holes can be blocked with the extra
screws supplied.
Fit the splash back (optional)
If the rear spacer is not fitted.
Hold the splash back in position.
The splash is fi tted using 4 screws in the rear edge
of the fl ue grille, two at each end. Fit the splash
baqck over the inner screws and then refi t the outer
two screws. (see fi gure).
From the rear refi t the 2 fi xing screws and nuts.
If the rear spacer is fitted
Hold the splash back in position. Fit using the two
fi xing screws (3mm hexagonal socket head) and
nuts that pass through the top of the rear spacer.