Agilent Technologies 8510XF Verification kits, Test port cables and adapters, Device under test

Verification kits

Verification kits are used to verify the performance specifications of an 8510 system. All kits include a precision Zo airline, mismatched airline and fixed attenuators. Measured data and uncertainties traceable to the U.S. National Institute of Standards and Technology (NIST) are included with each kit. Compliance with MIL-STD 45662A is available for an extra charge

Choose a verification kit for each connector type required.

Verification	Connector	Frequency		Verification	Connector	Frequency
kit	type	range (GHz)		kit	type	range (GHz)
85051B	7 mm	0.045	- 18	R11645A	WR-28	26.5 - 40
85053B	3.5 mm	0.045	- 26.5	Q11645A	WR-22	33	- 50
85055A	Type-N	0.045	- 18	U11645A	WR-19	40	- 60
85057B	2.4 mm	0.045	- 50	V11645A	WR-15	50	- 75
				W11645A	WR-10	75	- 110

Test port cables and adapters

Test port cables and adapter sets are available for various connector types. Special test port adapter sets convert the rugged ports of the network analyzer test set to the desired connector interface. Each kit contains two adapters, one male and one female. Both the cables and the test port adapters have one spe- cial female connector which is designed to connect directly to the 3.5 mm test port (2.4 mm for 8517B). This side of the cable or adapter can only be connected to the test set port and cannot be mated to a standard 3.5 mm (or 2.4 mm) male connector. Choose one of the configurations shown.

Configuration A. This cable arrangement is for applications where the device under test is connected directly to the test set port. This setup offers the best mechanical rigidity for device connection. To adapt the test set port (port 1) to the device under test, choose the appropriate special adapter set. In addition to converting the test port to the desired interface, these adapters also func- tion as “test port savers” which protect the test set from damage and wear due to heavy use.

For Agilent 8514B/8515A/85110A test sets (3.5 mm rugged test port connectors)

	Cables/adapter	Connector type
		(on device side of cable/adapter)
For 3.5 mm devices	85131C semi-rigid cable or	3.5 mm (f)
	85131E flexible cable	3.5 mm (f )
	85130D adapter set	3.5 mm (m and f)
For 7 mm devices	85132C semi-rigid cable or	7 mm
	85132E flexible cable	7 mm
	85130B adapter set	7 mm
For Type-N devices	Use 7 mm cables and the 7 mm-to-Type-N
	adapters included in the 85054B/D
	Type-N calibration kit

For Agilent 8517B test sets (2.4-mm rugged test port connectors)

	Cables/adapter	Connector type
		(on device side of cable/adapter)
For 2.4 mm devices	85133C semi-rigid cable or	2.4 mm (f)
	85133E flexible cable	2.4 mm (f )
	85130G adapter set	2.4 mm (m and f)
For 3.5 mm devices	85134C semi-rigid cable or	3.5 mm (f)
	85134E flexible cable	3.5 mm (f )
	85130F adapter set	3.5 mm (m and f)
For 7 mm devices	85135C semi-rigid cable or	7 mm
	85135E flexible cable	7 mm
	85130E adapter set	7 mm

Device

under

test

Configuration A

Network analyzer

test set

Test port adapter

Single cable

17