Agilent Technologies 85107B Configuration B Network analyzer test set Cable set Device under test

Configuration B. This cable arrangement is for applications where the device under test is connected between cable ends. This setup offers more flexibility when connecting to the device under test.

For 8514B/8515A/85110A test sets (3.5 mm rugged test port connectors)

	Cables/adapter	Connector type
	(on device side of cable/adapter)
For 3.5 mm devices	85131D semi-rigid cable set or	3.5 mm (m and f)
	85131F flexible cable set	3.5 mm (m and f)
For 7 mm devices	85132D semi-rigid cable set or	7 mm
	85132F flexible cable set	7 mm
For Type-N devices	Use 7 mm cables and the 7 mm-to-Type-N
	adapters included in the 85054B/D
	Type-N calibration kit

For 85110L Test sets (7 mm rugged test port connectors)

	Cables/adapter	Connector type
		(on device side of cable/adapter)
For 7 mm devices	11857D Cable pair	7 mm

For 8517B Test sets (2.4 mm rugged test port connectors)

	Cables/adapters	Connector type
		(on device side of cable/adapter)
For 2.4 mm devices	85133D semi-rigid cable set or	2.4 mm (m and f)
	85133F flexible cable set	2.4 mm (m and f)
For 3.5 mm devices	85134D semi-rigid cable set or	3.5 mm (m and f)
	85134F flexible cable set	3.5 mm (m and f)
For 7 mm devices	85135D semi-rigid cable set or	7 mm
	85135F flexible cable set	7 mm

For 8510XF systems (1 mm test port connectors)

	Cables/adapters	Connector type
For 1 mm devices	11500I (8.8 cm) test port cable	1 mm (f and f)
	11500J (16 cm) test port cable	1 mm (m and f)
	11500K (20 cm) test port cable	1 mm (m and f)
	11500L (24 cm) test port cable	1 mm (m and f)
For V-band waveguide devices	V281C adapter	1 mm (f) to V-band
		waveguide devices
	V281D adapter	1 mm (m) to V-band
		waveguide devices
For W-band waveguide devices	W281C adapter	1 mm (f) to W-band
		waveguide devices
	W281D adapter	1 mm (m) to W-band
		waveguide devices

Configuration B

Network analyzer

test set

Cable set

Device

under

test

18