Agilent Technologies E3630A Replaceable Parts, Ordering Information, Code Manufacturer Address

REPLACEABLE PARTS

INTRODUCTION

This section contains information for ordering replacement parts. Table A-12 lists parts by reference designators and pro- vides the following information:

a.Reference designators. Refer to Table A-10.

b.Agilent Technologies Part Number.

c.Total quantity used in that assembly.

d.Description.

e.Manufacturer's supply code number. Refer to Table A-11 for manufacturer's name and address.

f.Manufacturer's part number or type.

Mechanical and miscellaneous parts are not identified by ref- erence designator.

ORDERING INFORMATION

To order a replacement part, address order or inquiry to your local Agilent Technologies sales office (see lists at rear of this manual for addresses). Specify the following information for each part: Model, complete serial number of the power sup- ply; Agilent Technologies part number; circuit reference des- ignator; and description.

Table A-10. Reference Designators

AAssembly

C Capacitor CR Diode

DS Signaling Device(light)

FFuse

GPulse Generator

JJack

LInductor

QTransistor

RResistor

SSwitch

TTransformer

TP	Test Point
VR	Zener Diode

UIntegrated Circuit

W Wire

Table A-11. Code List of Manufacturers

CODE	MANUFACTURER	ADDRESS
01295	Texas Instruments Inc, Semicon Comp Div.	Dallas, TX
14936	General Instruments Corp, Semicon Prod	Hicksville, N.Y.
27014	National Semiconductor Corporation	Santa Clara, CA
28480	Agilent Technologies	Palo Alto, CA
04713	Motorola Semiconductor Products	Phoenix, AZ
32997	Bourns Inc.	Riverside, CA

A-12