Agilent Technologies FS2343 user manual J9 Pods 1Odd and 2 Even, Appendix

Appendix

FS2343 Paddle Signal to Logic Analyzer Connector and Channel Mapping

The following table shows how the FS2343 Probe connects FBDIMM AMB signals to the logic analyzer pods and channels through the 100 pin Samtec connectors. Note that the configuration files described earlier use various combinations of these Pod connections.

The nomenclature is NB/SB for North or Southbound, Lx for Lane number, Bx for bit in during the rising edge of Anly_clkp, and _xx is the bit for the Dual sampled (second) point which is on the falling edge of Anly_clkp.

J9 - Pods 1(Odd) and 2 (Even)

Signal	Logic Analyzer	SAMTEC	SAMTEC	Logic Analyzer	Signal
name/Logical					Name/Logical
	channel number	Pin number	Pin number	channel number
Signal Name					Signal name
	Ground	1	2	Ground
	NC	3	4	NC
	Ground	5	6	Ground
NB_L1_B0_6	Odd D0	7	8	Even D0	MODE
	Ground	9	10	Ground
NB_L1_B4_10	Odd D1	11	12	Even D1	NB_L1_B2_8
	Ground	13	14	Ground
NB_L0_B5_11	Odd D2	15	16	Even D2	FRAME
	Ground	17	18	Ground
NB_L0_B3_9	Odd D3	19	20	Even D3	NB_L0_B4_10
	Ground	21	22	Ground
NB_L1_B1_7	Odd D4	23	24	Even D4	NB_L2_B1_7
	Ground	25	26	Ground
NB_L1_B5_11	Odd D5	27	28	Even D5	NB_L2_B0_6
	Ground	29	30	Ground
NB_L0_B2_8	Odd D6	31	32	Even D6	NB_L1_B3_9
	Ground	33	34	Ground
NB_L0_B1_7	Odd D7	35	36	Even D7	NB_L3_B2_8
	Ground	37	38	Ground
NB_L2_B4_10	Odd D8	39	40	Even D8	NB_L3_B0_6
	Ground	41	42	Ground
			33