The Rear Panel – At a Glance

J2 Sense Connector

1 – Remote sense (+)

2 – Local sense (+)

3 – Not used

4 – Local sense (–)

5 – Remote sense (–)

The factory-shipped configuration is shown in the figure.

SW1 Setup Switch

1 – Output voltage, voltage programming

2 – Output current, voltage programming

3 – Programming range (voltage/resistance)

4 – Voltage and Current monitoring range

5– Shut-Off Logic Select

6– Not Used

7– Output voltage, resistive programming

8– Output current, resistive programming

9– Enable/Disable control

 

 

 

 

 

6

7

8

9

 

 

 

4

5

 

 

1

2

3

 

 

 

 

The factory-shipped setting is Down for all switches.

Down: The output voltage is programmed by the front panel.

Up: The output voltage is programmed by the external voltage signal.

Down: The output current is programmed by the front panel.

Up: The output current is programmed by the external voltage signal.

Down: The remote programming range is: 0 – 5V / 0 – 5KΩ.

Up: The remote programming range is: 0 – 10V / 0 – 10KΩ.

Down: The remote monitoring range is: 0 – 5V.

Up: The remote programming range is: 0 – 10V.

Down: OUT OFF = Low (0 –

0.6V) or short;

OUT ON = High (2V – 15V) or open.

Up: OUT OFF = High (2V

– 15V) or open;

OUT ON = Low (0 – 0.6V) or short.

Down: The output voltage is programmed by the front panel.

Up: The output voltage is programmed by the external resistor.

Down: The output current is programmed by the front panel.

Up: The output current is programmed by the external resistor.

Down: The J1 Enable+/Enable– pins are not active.

Up: The J1 Enable+/Enable– pins are active.

Series N5700 User’s Guide

13

Page 12 Page 14
Page 13
Image 13
Agilent Technologies N5700 manual J2 Sense Connector, SW1 Setup Switch, Remote sense + Local sense + Not used
Page 12 Page 14

N5700 specifications

Agilent Technologies, now part of Keysight Technologies, is renowned for its innovative solutions in electronic measurement and instrumentation. Among its impressive portfolio, the Agilent N5700 series of power supplies stands out, providing precision, reliability, and versatility for a range of applications in test and measurement.

The N5700 series features multiple models, each designed to meet the varying power requirements of test systems and electronic devices. One of its key characteristics is its adjustable output voltage and current, allowing users to set parameters according to specific test needs. With outputs ranging from 0 to 60 V and up to 6 A, the N5700 series caters to both low and high-power applications effectively.

A notable technology integrated into the N5700 series is its advanced measurement capabilities. The built-in voltmeter and ammeter enable real-time monitoring of output voltage and current, ensuring precise control over the power supplied to the device under test. This feature is particularly advantageous in troubleshooting and optimization scenarios, providing engineers with immediate feedback on performance.

The N5700 also embraces the latest in power supply control technology with its intuitive user interface. The front panel incorporates a clear display and simple navigation controls, allowing users to program settings easily and access functions without extensive training. Additionally, remote programming capabilities via GPIB, USB, or LAN facilitate integration into automated test setups, enhancing productivity and efficiency.

Thermal management is another hallmark of the N5700 series. Its design ensures effective heat dissipation, enabling reliable operation even under demanding conditions. This robustness is critical in environments where consistent performance is essential, such as in research laboratories and manufacturing facilities.

Furthermore, safety features are thoughtfully included in the N5700 series, such as overvoltage protection, overcurrent protection, and short-circuit protection. These elements assure users that their devices and test setups remain secure during testing, minimizing the risk of damage.

In summary, the Agilent N5700 series power supplies encapsulate the fusion of precision, advanced measurement technology, user-friendly design, thermal management, and robust safety features. This combination makes them an invaluable tool for engineers and researchers engaged in electronic testing and development across various industries. With its versatility and reliability, the N5700 series continues to play a pivotal role in advancing electronic measurement methodologies.
Top Page Image Contents