ENGLISH
23.Slide the axle through the axle clamps. See figure 12.
24.Assemble a cotter pin to the inner hole at one end of the axle.Place a large flat washer, a wheel and then another large flat washer onto the axle. Secure the wheel with a cotter pin assembled to the outer hole at the end of the axle. Repeat step for other wheel. See figure 12.
25.Center the wheels and axle side to side. Tighten the four nuts on the axle clamps.
AXLE
COTTER
PIN COTTER
PIN
LARGE
FLAT
WASHER
LARGE
WHEEL FLAT
WASHER
MAINTENANCE
1.Grease or oil wheel bearings occasionally. Use automotive wheel bearing type grease or 20 weight oil.
2.Periodically retighten all screws, especially after heavy use. Do not exceed load capacity rating of 400 lbs.
3.Clean cart thoroughly after each use.
4.Store indoors during severe weather.
5.Apply light coat of varnish to all wood surfaces annually.
6.Use glossy black enamel spray paint to touch up scratched or worn painted metal surfaces.
RECOMMENDED TIRE PRESSURE
DONOTEXCEEDMAXIMUMPRESSUREPRINTED ON TIRE
FIGURE 12
26.Turn cart right side up, so that it rests on its wheels.
27.Place front panel in guides to complete assembly.
28.Your cart is now ready to use.