ENGLISH
17.Place the screen down into the hopper, sliding the edge of the screen under one of the clips. Slightly bow the screen to slide the opposite side of the screen under the other clip. See figure 10.
CLIPS
FIGURE 10
18.For most vehicles, you can keep the assembled hitch extension bracket in its default position shown in figure 11. Attach the spreader hitch to your vehicle hitch. Check for interference with the spreader directly behind and out to both sides of the vehicle. Lift the spreader at each position to make sure there is no interference with the spreader's flow control. If there is interference with the rear of the vehicle, assemble the hitch extension bracket as shown at the bottom of figure 11. Tighten the bolts and nuts when finished.
DEFAULT POSITION
EXTENDED
(IF INTERFERENCE)
FIGURE 11
7