Aiphone AXW-AVR Configuration Diagram, AX-DMor IE/IF-Series, Axw-Avt, Audio Door Station, Ax-Dv

CONFIGURATION DIAGRAM:

AXW-AVT / AXW-AVR with Meridian Technology Fiber (ST/SR-AiphoneAX1-XS), 1 of 2

AX-DM or IE/IF-Series	AXW-AVT	PS-2420UL
Audio Door Station	24V
	+			+
	-		-

Configuration Notes (1 of 2, continued):

4.When the SENSOR input is used, the door station will be turned on whenever the sensor device is activated (Normally Closed contact from 3rd party supplied device).

RELAY

Normally Open contact for remote device activation

NO

5. The RELAY output provides an optional Normally Open dry contact

NO

(i.e. video switcher, DVR, etc.)

SENSOR

Normally Closed input for remote activation

output which is activated whenever the AX-series door station is in use.

NC

This can be used to activate any device local to the AXW-AVT (DVR

NC

(i.e. motion sensor, loop detector, etc.)

CALL IN

trigger, video switcher activation, local call indication, etc.).

+

-

6. Configure AXW-AVT internal jumpers as necessary (see Pg. 21).

CCTV Camera

CALL OUT

+

Meridian

75 Ohm, 1V Peak-to-peak

-

(Independently powered)

AUDIO IN

ST-AiphoneAX1-XS

+

-

*

AUDIO OUT

+

-

AX-DV

DOOR

Optic Fiber

PWR

(to SR-AiphoneAX1-XS, Pg. 5)

CAT-5e

DIAG

VIDEO IN

TX C/L

Coax

RX C/E

OPTICAL

Connection details from

VIDEO OUT

Coaxial Video Cable

SYN

AXW-AVT to ST-AiphoneAX1-XS

VID

‘Audio’ Connector Detail:

Configuration Notes (1 of 2):

VIDEO

Pin 1

Audio In -

DR1

1

1.

AX-series video door station connects to ‘DOOR’ input of AXW-AVT.

AUDIO

Pin 2

Audio In +

DR2

Pin 3

Audio Out -

Ensure that the “CCTV / DOOR’ switch on the AXW-AVT is in the ‘DOOR’

AR1

3

position.

AR2

5

Pin 4

Audio Out +

‘C.C.’ Connector Detail:

*2. Alternatively, an IE/IF-series or AX-DM audio door may be used, along

CR1

1

Pin 1

Call Out -

CR2

C.C.

Pin 2

Call Out +

with 3

rd

party CCTV camera. Connect audio door station to ‘Door’ input

DT1

4

Pin 3

Call In +

(following the wiring method shown in the AX-series installation manual,

To Door

DT2

1

Pin 4

Call In -

pg. 12). Connect the camera to ‘Video In’ and put the ‘CCTV / DOOR’

Release

AT1

AT2

3

DATA

‘DATA’ Connector Detail:

switch in the ‘CCTV’ position.

CT1

5

Pin 1 & 2

Optional Door

3.

Connect the Call In / Call Out and Audio In / Audio Out connections on

CT2

release contact

output

the AXW-AVT to the Meridian fiber transmitter module (as detailed at

Fig. 1

right, Fig. 1). For complete pin definitions, consult the Meridian

RX

installation document.

TX

Please Note:

Only information pertaining to the connection and operation of the AXW-AVT / AXW-AVR and listed 3rd party devices interfacing with it are included here. Aiphone is not responsible for attempts to connect the AXW-AVT / AXW-AVR to untested 3rd party transmission hardware. Consult the installation manual for the 3rd party device being utilized for further information regarding physical mounting, base functionality, power requirements, etc. For the most up-to-date compatibility information, please consult http:// www.aiphone.com or contact Aiphone Technical Support.

	For complete AX system installation, wiring, and programming information, please consult the AX Installation Manual (included on CD with AX Central Exchange Unit, or
Pg. 3	available at http://www.aiphone.com).	Pg. 4