Aiphone AXW-AVT Configuration Diagram, Axw-Avr, Infinova, N3732RA-M, Configuration Notes 2 of

CONFIGURATION DIAGRAM:

AXW-AVT / AXW-AVR with Infinova Fiber (N3732TA-M/-R, N3732RA-M/-R), 2 of 2

Configuration Notes (2 of 2):

1.Connect the AXW-AVR ‘CEU’ connection to an unused Door station input on the AX-CEU and ensure that the AX-CEU has been programmed to accept a video door station on that input (see Pg. 2).

2.Connect the Call In / Call Out and Audio In / Audio Out connections on the AXW-AVR to the terminal block of the Infinova N3732RA-M, as shown. For detailed terminal definitions, consult the Infinova installation document.

3. Per the Infinova installation manual, set JP11 and JP21 for “600-Ohm, Balanced” audio connection.					AXW-AVR
								CEU			To AX-CEU
4. The RELAY output on the AXW-AVR											(Door Input)
			Infinova				AUDIO IN
	provides a Normally Open dry contact				-
	output whenever the door station	N3732RA-M				+
							AUDIO OUT
	connection is active. This can be used						+
	to activate any device local to the						-
							CALL IN
	AXW-AVT (DVR trigger, video switcher
							+
	activation, local call indication, etc.).		PWR				-
				**			CALL OUT
			V		+
					-
							RELAY			Normally Open contact for remote device activation
	Optic Fiber								NO
									NO		(i.e. video switcher, DVR, etc.)
	(to N3732TA-M, Pg. 8)
			OP	Coaxial Video Cable			VIDEO IN
							VIDEO OUT			Composite Video Output
										(for CCTV monitor, DVR, etc.)
			1
			2	Application Consideratison:
			3
			4	**If the Infinova fiber modules relay is to be used for door release, the
			5	‘Call Out’ connection on the AXW-AVR will not be used. Instead,
			6
			7	connect pins 15/16 from the fiber module to the appropriate door release
			8	output on the AX-CEU. Be sure to short together the ‘Call Out’
			9	terminations on the AXW-AVT, as noted on Pg. 8-9.
			10
			11	Power supply connections to the Infinova fiber modules are not shown,
			12	and are dictated by the mounting method chosen (standalone, rack
			13	mount, etc.). Contact Infinova for available options.
			14
			15	AXW-AVT / AXW-AVR should be mounted as close as possible to their
			16	corresponding Infinova fiber modules. Avoid mounting units near high
				voltage AC devices, or other sources of inductive noise.

Please Note:

Only information pertaining to the connection and operation of the AXW-AVT / AXW-AVR and listed 3rd party devices interfacing with it are included here. Aiphone is not responsible for attempts to connect the AXW-AVT / AXW-AVR to untested 3rd party transmission hardware. Consult the installation manual for the 3rd party device being utilized

	for further information regarding physical mounting, base functionality, power requirements,	etc. For the most up-to-date compatibility information, please consult http://
	www.aiphone.com or contact Aiphone Technical Support.
	For complete AX system installation, wiring, and programming information, please consult the AX Installation Manual (included on CD with AX Central Exchange Unit, or
Pg. 9	available at http://www.aiphone.com).	Pg. 10