Aiphone AXW-AVT Out In, Video, Axw-Avrterminal Definitions, Compatible Door Stations Axw-Avt

AXW-AVR

OUT IN

75 OHM

VIDEO OFF ON

	CALL		AUDIO
RELAY	OUT	IN	OUT	IN		CEU
NO NO	+ - +	-	+ -	+	-

			AXW-AVR
AXW-AVR TERMINAL DEFINITIONS:
RELAY NO, NO:		Normally Open relay contact, activated whenever communication is active.
CALL IN/OUT:		Transistor-switched input / output to be connected to relay input / output on
		transmission equipment. ‘Call In’ indicates call placed by door station, ‘Call Out’
		indicates master-initiated activity (polarity of input / output indicated by ‘+’ and ‘-’).
AUDIO IN/OUT:		Input / Output connections for audio transmission (line level, polarity indicated by
		‘+’ and ‘-’).
VIDEO IN:		Composite input signal from CCTV camera, if used in place of AX-series audio
		video door station.
VIDEO OUT:		Composite output to external transmission equipment. Source dependent upon
		CCTV / DOOR switch.
OFF/ON SWITCH:		Determines whether AX-series audio video door station video (‘DOOR’ setting) or
		external CCTV video (‘CCTV’ setting) will be present on ‘VIDEO OUT’ for
		connection to external transmission equipment.
CEU (RJ-45 Jack):		RJ-45 connection from AXW-AVR to CEU, simulating a standard AX-series Audio/
		Video door station.
COMPATIBLE DOOR STATIONS (AXW-AVT):
AX-DV	Surface mount, die cast zinc, vandal resistant, Audio-Video
AX-DVF	Flush mount, stainless steel, vandal resistant, Audio-Video
AX-DM	Mullion mount, black plastic, Audio Only
IF-DA	Surface mount, brown plastic, Audio Only
IE-DC	Surface mount, brown plastic w/aluminum, Audio Only
IE-JA	Flush mount, 2 gang, stainless steel faceplate, Audio Only
IE-SS	Flush mount, 2-gang, stainless steel, vandal resistant, Audio Only
IE-SSR	Flush mount, 2-gang, stainless steel, vandal resistant w/red mushroom call button, Audio Only

PROGRAMMING:

1.Follow standard AX programming procedures as described in the AX Installation & Operation manual (included on CD with the AX CEU).

2.When configuring door stations, be sure to set the station number corresponding to the AXW-AVT / - AVR to “Video” in the AX setup utility.

Typical configuration selection

Pg. 2