8 | SETTING UP (ENTRANCE STATION) | |
|
| |
1 |
|
|
| 95cm | |
|
| |
|
| 65cm |
|
| 65cm |
|
| 50cm |
2 |
Entering Names and Addresses
•Remove the resident name/address plate or paper by pressing the left or right end. (Peel off the plastic film.)
•Use a permanent pen to write the resident name and address on the transparent plate and mount the plate on the module.
3GH-VA
50cm
24cm
113cm 24cm
113cm
[1]
[2]
Adjusting the Camera Angle
1.View from the initial camera position
2.Changing the camera angle
•Remove the rubber cap. Move the lever to the desired position. ∗ Do not forget to reset the rubber cap.
3. Image view area after adjustment
[1] When camera has been adjusted to the left
[2] When camera has been adjusted to the right
- 26 -