Configuring Intercoms

Configure Intercoms

When Intercoms are shipped from Aiphone, they do not have IP address information configured. To configure them, you must connect them to your network, install TalkMaster™ and select the menu Admin ￿ Configure Intercoms.

The Intercom Configuration Tool will immediately search for all Aiphone intercoms connected to your current network segment. You must match the Icom ID displayed on the TalkMaster screen to the ID# printed on the back of the intercom and then configure the Intercom’s IP address information and the IP address of the server it will connect to.

If you have intercoms located in a different network segment, you may not find them since many routers filter out UDP Broadcasts. You can either install these intercoms on the current network segment or you can install a copy of TalkMaster in the other network segment to configure your intercoms. You may also refer to the TalkMaster installation CD for instructions on installing the UBAM™ software which will allow you to configure units across different networks.

A network segment is determined by looking at the subnet mask and the corresponding bits in the IP Address. For example, on IP Address 192.168.2.175 Subnet 255.255.255.0, the network segment is 192.168.2, and on IP Address 126.10.11.12 Subnet 255.255.0.0, the network segment is 126.10.

To configure Intercoms to connect to TalkMaster™, see Intercom Configuration - TalkMaster Clients.

To configure two Intercoms to communicate with each other in Direct Mode, see Intercom Configuration - Direct Mode.

Advanced Configuration

When the Advanced Configuration option is checked in the Intercom Configuration Tool View Menu, you can specify addition options for an IP Intercom.

If these options are grayed out, you have an intercom with legacy firmware. You can configure intercoms with legacy firmware from the main TalkMaster™ screen using the menu Admin ￿ Preferences and selecting the Legacy tab. To update the firmware, see Updating Firmware.

Fail Forward IP 1,2,3 allow you to specify up to three IP addresses of alternate TalkMaster consoles that this Intercom will attempt to connect to if it’s current TalkMaster console becomes unavailable. If an Intercom has failed forward to an alternate IP and it’s default TalkMaster console is restarted, the default TalkMaster console can reacquire the intercom by using the menu Console ￿ Retrieve Intercoms.

GPIO 4 Control Mode allows you to specify how General Purpose I/O (GPIO) port 4 is used. On Intercom models IP-EWST and IP-EWST-POE, GPIO 4 is connected to a relay (dry contact).

The normal state for GPIO 4 is logic high (+5 volts). When activated, it changes to logic low (0 Volts).

39

Page 43
Image 43
Aiphone IP EWST-POE manual Configuring Intercoms, Configure Intercoms, Advanced Configuration

IP EWST-POE specifications

The Aiphone IP EWST-POE is a state-of-the-art intercom and communication device designed to enhance security and facilitate seamless communication in various environments, such as commercial buildings, schools, and residential complexes. This system stands out due to its adaptability and robust performance, aligning with modern connectivity needs.

One of the main features of the Aiphone IP EWST-POE is its Power over Ethernet (PoE) capability. This technology allows the device to receive both power and data through a single Ethernet cable, simplifying installation and reducing the need for multiple power sources. This is particularly beneficial in settings where electrical outlets are limited or difficult to access.

The device boasts a high-definition video camera, which provides clear and crisp visuals for monitoring and communication. The integration of wide-angle lenses enhances the field of view, enabling users to capture more of the surrounding area. Coupled with advanced audio features, including noise cancellation and full-duplex communication, the Aiphone EWST-POE ensures that conversations are both clear and natural.

Another notable characteristic is the built-in web-based management interface, which allows for easy configuration and monitoring. Users can customize settings, manage users, and view video feeds via a simple online portal, streamlining administrative tasks and enhancing usability. In addition, the device supports video recording and playback, which can be crucial for security purposes.

The Aiphone IP EWST-POE is designed with durability in mind, featuring a high IP rating that makes it resistant to dust and moisture. This robustness ensures reliability, especially in outdoor applications or areas with challenging environmental conditions.

Moreover, the device is compatible with various third-party applications, making it a versatile solution for schools, healthcare facilities, and businesses looking to integrate their communication systems. Its scalability allows for easy addition of more devices as needs grow, ensuring a future-proof investment.

In summary, the Aiphone IP EWST-POE is a powerful communication solution offering key features such as PoE capability, high-definition video, robust audio performance, and user-friendly management. Its durability, scalability, and compatibility with third-party applications make it an ideal choice for enhancing communication and security in various settings.