Airlink101 APSUSB201W specs

Step 5 Double-click on the Print Server Name, select the Printer Port Name, and click Next.

Step 6 Click Finish and OK. (For Windows 95/98/ME, you’ll need to reboot the computer).

Step 7 Run the PS Wizard on all the computers in your network that will use the Print Server.

12

Image 13

Airlink101 APSUSB201W manual

Contents

Ver a Table of Contents Introduction Package ContentsSystem Requirements Connecting the Print Server Hardware Installation Installing PS Utility Click Next Click Yes Click Finish Configuring Network Setting Click OK Verifying Network Connection Page Running PS Wizard Click Next Page Performing Operating System Print Test Click on Start, Settings, Printers and FaxesPage Infrastructure Mode Printing Configuring Wireless PrintingClick on Configuration and then Wireless Page Page Ad-Hoc Mode Printing Click Save Using the PS Utility Click on the Show Web Setup button in PS Utility Using the Web Configuration Utility System Management Wireless Network User Configuration Wireless Advanced Setting Wireless InterfaceSettings Open System, Shared Key, and Both WEP Encryption TCP/IP AppleTalk Microsoft Network Define Users Printing Control Mail Account MailMail Notification Snmp Print Test Tools Receive E-mail Mail Test E-mail Account Factory Reset Reset Firmware Upgrade Backup Device Configuration to File BackupRestore Device Configuration from File Help Printing in Mac OS Using RendezvousPage Page For Mac OS Setting AppleTalk/LPR PrintingPage Page To set up the Print Server for AppleTalk printing To print from Mac OS Client Workstations Page Network Data Transfer Rate 100Mbps Product SpecificationsFlash ROM 2MB Standard Snmp Technical Support Appendix