6.2.2 Wireless Security

You can configure wireless security such as WEP or WPA encryption on this screen.

Note: It is recommended that you use WPA encryption over WEP if your wireless clients support WPA. All of the wireless clients must use the same security settings in order to connect to the router.

WEP

To enable WEP, select WEP from the Security Mode.

Encryption: Choose from 64 bits or 128 bits

Passphrase: You can enter a passphrase and click on the Generate button and the router will automatically generate four WEP keys for you.

WEP Key 1 – 4: Manually assign a passphrase for each key. If you selected 64 bits encryption, enter 10 HEX characters (0-F) for each key. If you selected 128 bits encryption, enter 26 HEX characters (0-F) for each key.

TX Key: Select a key to be the active key.

Click Apply to save the setting.

18

Page 18
Image 18
Airlink101 AR525W user manual Wireless Security, Wep