Aiwa CX-NMT240, NSX-MT241 1 Press TAPE, 1 Press TAPE, To stop dubbing, To stop dubbing, 3Press SYNC DUB to start recording, 3Press TAPE DECK 1/2 to select deck

m

● Set the tape to the point where recording will start.

● Note that recording will be done on one side of the tape only.

1 Press TAPE.2 Insert the original tape into deck 1 and the tape to be recorded on into deck 2.

Insert the tapes with the sides to be played back or recorded on facing out from the unit.

3Press TAPE DECK 1/2 to select deck 1.

“TP1” is displayed.

4Press ● REC/REC MUTE to start recording.

Playing and recording start simultaneously.

To stop dubbing

Press ■ .

2

lt– --B

This function allows you to make exact copies of the original tape.

● Dubbing does not start from a point halfway in the tape.

● Note that recording will be done on one side of the tape only.

1 Press TAPE.

2Insert the original tape into deck 1 and the tape to be recorded on into deck 2.

Insert each tape with the side to be played back or recorded on facing out from the unit.

3Press SYNC DUB to start recording.

The tapes are rewound to the beginning of the front sides, and recording starts.

To stop dubbing

Press 9.

ENGLISH 15