DVDs:

Playback starts automatically .

If the menu is displayed, see “USING THE MENU”, below .

Title number Elapsed time of current title

To switch the number between title and chapter , press SHIFT+TITLE/CHP. With each press, title or chapter is displayed alternately .

Audio CDs function:

Total number of tracks

Total playing time

6If playback does not start automatically, press c to start playback.

To play back DVDs recorded in Dolby Digital or DTS sound

See section “SURROUND PLA YBACK” (pages 24-26).

To play back an MP3 disc

Menu screen (SMAR T NAVI) appears on the TV screen after the disc is loaded.

1.Press i,k,jor lto select PLA Y MODE. SHIFT+PRGM, RANDOM or REPEAT is also available. For the programed playback, see page 20.

2.Press i,k,jor lto select the folder and press ENTER.

3.Press i,k,jor lto select the file.

4.Press cto start playback.

When the play mode is program, the program file is added each time cis pressed. To start playback, press sand then

press c.

 

 

• 0-9is also available to select the file up to 2 digit number

.

The file with

cannot be played back since it cannot be read

properly .

 

 

NOTE

•When loading an 8-cm (3-inch) disc, put it onto the inner circle of the slot.

•Do not place more than one disc.

•Do not tilt the unit with disc loaded. Doing so may cause malfunctions.

USING THE MENU

DVDs with the menu function may automatically display the menu screen when the disc is loaded. Operate the menu as follows.

DVDs

1Press i, k, j, or l to select your desired program.

2Press ENTER to begin playback.

To manually display the menu

Press MENU or TOP MENU during playback or stop.

NOTE

•The disc continues to spin as long as the menu is displayed.

•The contents and operation of the software specific menu vary with the disc. Follow the instructions on the disc and on the menu screen.

STOPPING AND PAUSING

To stop playback

Press s.

Playback stops. For DVDs, “RESUME” appears and the unit remembers the point at which playback stopped.

To resume playback from the point where it stopped (DVD only)

Press c.

Playback starts where it last stopped (Resume function).

To clear the point to be resumed (DVD only) Press sagain during stop.

“STOP” appears in the TV display . The resume memory is cleared,

and playback starts at the beginning of the disc when

cis

pressed.

 

Last scene function (DVD only)

If the disc is taken out or sis pressed to clear the resume memory , resume function is still ef fective (up to 7 discs). Next time the disc is loaded, “PRESS PLA Y TO RESUME PLAY” appears on the TV screen. To resume playback, press cwhile the message is displayed. If a new disc is loaded when the memory is full, the resume data for the oldest disc is erased.

Last screen function may not work with some discs.

To pause playback

Press a.

To resume playback, press c.

NOTE

•DVD playback is resumed with the subtitle and audio language setting at the time it was stopped, regardless of possible later changes.

•During stop of MP3 disc or resume of DVD, the disc is still spinning.

16 ENGLISH