SURROUND PLAYBACK MODE INDICATION

The “hDIGITAL”, “dts” and “hPRO LOGIC” indicators show your present playback condition as follows;

“hDIGITAL” indicator lights up...

when a Dolby Digital source is played back.

“dts” indicator lights up...

when a DTS source is played back.

“hPRO LOGIC” indicator lights up...

when a 2-channel source, such as the following, is played back with PRO LOGIC mode:

•Dolby Pro Logic source (such as a video cassette recorded in Pro Logic played back on a connected VCR player)

•2-channel Dolby Digital source (DVD etc.,)

If the source does not play in your desired playback mode

Your actual surround playback condition is determined by a number of factors. Check the following;

–type of signal and number of channels on your source For example, a Dolby Digital or a DTS disc may come in its full 5.1 channels, or in 2 channels, etc. Press ON SCREEN on the remote control to check the audio signal type information.

See “ON SCREEN DISPLA Y INFORMATION”, page 23.

–selected track

Your disc may of fer a choice among several types of sound mixes. Check that your desired mix is selected with the AUDIO button on the remote control.

See “CHANGING AUDIO TRACKS”, page 22.

–type of connection

If you are using analog connection, Dolby Digital or DTS playback is disabled.

SPEAKER SETTINGPLAYBACK SURROUND

NOTE

 

 

• When the remote control is VIDEO 1, VIDEO 2,

TV or CABLE/

SAT. mode, press i,k,jor lwith pressing

SHIFT.

SETTING UP THE SPEAKER SIZE

You can set each speaker size and whether they are present or not.

1Press SHIFT+SP SETUP.

2Press ior kto select “SP SIZE”.

With each press:

 

 

 

En

 

 

 

 

 

 

SP SIZE

 

SP DIST

 

BALANCE

 

TEST TONE

 

 

 

3Press l.

4Press ior kto select the speaker for setting.

With each press:

FRONTCENTERSURROUNDSW

5Press l.

6Press ior kto select the speaker type.

With each press:

FRONT:

F-LARGE

 

F-SMALL

 

 

 

 

 

 

 

CENTER:

C-LARGE

 

C-SMALL

 

C-NONE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SURROUND:S-LARGE

 

S-SMALL

 

S-NONE

 

 

SW:

 

 

 

 

 

 

 

 

 

 

 

 

 

SW-YES

 

SW-NO

 

 

 

 

 

 

 

LARGE: Large speaker . When bass playback is possible. (100 Hz or lower is the target.)

SMALL: Small speaker . When bass playback is not possible.

NONE: When not using the center or the surround speakers.

YES: When using a subwoofer .

NO: When not using a subwoofer .

(Default: F-SMALL, C-SMALL, S-SMALL, SW -YES)

7Press l.

“ENTER” flashes. Then the selected item is displayed. If you set other speaker , press lto go back to step 4.

When the setting is not changed, the unit goes back to step 4.

ENGLISH 25