REMOTE CONTROL

INSERTING BATTERIES

Open the battery cover on the rear and insert two R03 (size AAA) batteries.

When to replace the batteries

The maximum operational distance between the remote control and the sensor on the main unit should be approximately 5 meters (16 ft.). When this distance decreases, replace the batteries with new ones.

NOTE

•If the remote control is not going to be used for an extended period of time, remove the batteries to prevent possible electrolyte leakage.

•The remote control may not operate correctly when:

-The line of sight between the remote control and the remote sensor inside the display window is exposed to intense light, such as direct sunlight

-Other remote controls are used nearby (those of a television, etc.)

OPERATING OTHER EQUIPMENT

You can set the remote control to operate other equipment by inputting the brand code.

Setting the brand code

1 Turn on the equipment to be set.

2 Hold down the corresponding source button ( VIDEO 1, VIDEO 2, TV, CABLE/SAT.) and press 0-9to input the three-digit brand code. (Brand code is shown at the end of the operating instructions.)

3Release the corresponding source button. The setting is completed.

Operating other equipment

Press the corresponding source button.

The remote control goes

to the corresponding source mode.

0-9,TV/VIDEO, TV CH N

M, TV VOL +-and POWER etc., are available.

Pressing POWER again within 3 seconds turns this unit of f even when the remote control is the corresponding source mode.

When operating this unit , press DVD/CD or TUNER/BAND.

NOTE

•This remote control may not correspond to all models of the brand shown at the end of the operating instructions.

•When the batteries are removed from the remote control, all

settings stored in memory may be lost.

 

• Some buttons on the remote control may not work exactly

.

PARTS AND CONTROLS

MAIN UNIT

1POWER 6STANDBY/ON

Turns the unit on and of f (standby).

2zOPEN/CLOSE

Opens and closes the disc tray .

3 PHONES jack

Plug in here an optional headphones set with a stereo mini plug (ø 3.5mm, 5/32 in.). Speaker output is canceled.

4SURROUND

Selects a listening mode.

BASS/TREBLE

Adjusts the bass/treble level.

SLEEP

Enters sleep-timer setting mode.

BAND

Selects the radio band.

5FUNCTION

Selects DVD/CD, FM (AM), VIDEO 1 (ANALOG), VIDEO 1 (DIGITAL), VIDEO 2 (ANALOG) or VIDEO 2 (DIGIT AL) function.

6cPRESET

Disc: starts playback.

Radio: switches between tuning mode and preset mode.

sCLEAR

Disc: stops playback.

Radio: clears a station preset.

aSET

Disc: pauses playback.

Radio: stores the received station to preset.

frTUNING-, gtTUNING+

Disc: skips to a previous or a succeeding chapter/track when pressed, searches a chapter/track in fast forward or fast reverse playback when held down.

Radio:manually tunes down or up within the band (tuning mode). Selects the preset channel (preset mode).

PREPARATIONS

En

ENGLISH 9