PREPARATIONS

CONNECTIONS

IMPORTANT

Connect the speakers, antennas, and all optional equipment first. Then connect the AC cord.

Subwoofer

Surround

Surround

speaker

speaker

 

Center speaker

Front speaker

Front speaker

PREPARATIONS

En

1Connect your television set to this unit.

If your TV has an S-video input jack;

Connect the S-VIDEO OUT jack of this unit to the S-video input jack of your TV with an optional S-video connecting cord. Also connect the VIDEO OUT jack of this unit to the video input jack of your TV since the signal from S-VIDEO

OUT jack is output only when the function is DVD/CD.

If your TV does not have an S-video input jack; Connect the VIDEO OUT jack of this unit to the video input jack of your TV with the supplied video connecting cord.

NOTE

•The illustration here shows the connection to the VIDEO

jack. S-(separate) video connection, if available, of

fers

higher quality than conventional video (composite)

 

connection.

 

• If your television is a 16:9 (wide) ratio set, the default “TV DISPLAY” setting has to be changed in the DVD setup.

See “TV DISPLA Y”, page 31.

 

• Direct connection between this unit and your

TV set is

recommended, as described above. If the video signal from this unit is made to pass through any other video equipment, the picture will be blurred when playing copy- protected DVDs.

• To view the video output from this unit, select the corresponding video input on your TV.

2Connect the speakers to this unit.

All speakers for a full 5.1-channel home theater configuration come supplied with your DVD system.

1Place the speakers in their proper position.

Speaker placement

The front and the surround speakers appear identical but should be dif ferentiated. Check their rear panels. Either of the two front speakers can be used as the right or the left one, and likewise for the surround speakers.

ENGLISH 5