8Press SHIFT+SP SETUP.

The setting is completed.

NOTE

• When “F-SMALL” is selected, “SW -YES” is automatically set and cannot be changed.

• “CENTER” and “SURROUND” cannot be set when STEREO mode is selected. (See “PLA YING WITH SURROUND SOUND”, page 24)

ADJUSTING THE SPEAKER DISTANCE

Adjusts the speaker distance so that sounds from each speaker can reach the listening position at the same time.

1Press SHIFT+SP SETUP.

2Press ior kto select “SP DIST”.

With each press:

SP SIZESP DISTBALANCE TEST TONE

3Press l.

4Press ior kto select the speaker for setting.

With each press:

FRONT CENTER SURROUND

5Press l.

6Press i or k to adjust the distance from each

speaker to the listening position.

Default:

FRONT:

F

17FT (feet)

CENTER:

C

17FT (feet)

SURROUND:

S

12FT (feet)

Adjustable range: 1FT to 30FT (for each speaker)

7Press l.

The adjusted level is set and back to step 4.

8Press SHIFT+SP SETUP.

The setting is completed.

ADJUSTING THE LEVEL BALANCE OF THE FRONT SPEAKERS

1Press SHIFT+SP SETUP.

2Press ior kto select “BALANCE”.

With each press:

SP SIZESP DISTBALANCE TEST TONE

3Press l.

4Press ior kto adjust the level balnce.

Default:

L0dB (Left front) R 0dB (Right front)

Press lto switch the display between “L” and “R”.

5Press SHIFT+SP SETUP.

The setting is completed.

ADJUSTING THE SPEAKER CHANNEL LEVEL

Using a test signal, the sound level of all available channels should be adjusted so that the volume level from each speaker sounds equal.

1Press SHIFT+SP SETUP.

2Press ior kto select “TEST TONE”.

With each press:

SP SIZESP DISTBALANCE TEST TONE

3Press l.

The test signal automatically cycles through the channels in the following order:

L C R RS LS

(L: Left front, C: Center , R: Right front, RS: Right Surround,

LS: Left Surround)

4While the desired channel is displayed, press i

or kto adjust the channel level.

Adjustable range: –10 to +10(dB)

5Press SHIFT+SP SETUP.

The setting is completed.

NOTE

When the volume level is set to 80, any one of speaker channel level cannot be set to more than +1 dB.

When the surround mode is set to the STEREO mode (page 24), the speaker channel level cannot be adjusted.

26 ENGLISH