Programmed Play
Up to 30 tracks can be programmed from the disc.
1In stop mode, keep spressed until “M” flashes in the display.
2Press for gto select a track, then press s to store it.
Track number | Programmed number |
TAPE OPERATION
Recording
Note that recording is done on only one side of the tape.
1 | Insert a tape with the side to be recorded facing |
|
| out. |
|
2 | Get ready to record from the source. |
|
| To record from a CD, press CD and load the disc. | En |
| To record from a radio broadcast, press TUNER/BAND |
and tune to a station.
To record from the connected equipment, press AUX and start playback.
To select a track with the remote control
Press the numbered buttons
3Repeat step 2 to program other tracks.
To return to stop mode in steps 1 to 3, keep spressed.
4Press c/a to start play.
To check the program, press for gin stop mode. To clear the program, press sonce in stop mode so that “M” disappears in the display.
To change the programmed tracks, clear the program and repeat all the steps again.
Inserting a Tape
Press Zto open the cassette holder and insert a tape with the exposed side down and the side to be played facing out.
Push the cassette holder to close.
Playing a Tape
Press c while the power is off.
The power is turned on and play of the inserted tape begins. The volume level is displayed during tape operation.
Z– Stops play. The power will be automatically turned off.
a– Pauses play. To resume play, press again.
f, g- Fast forwards/rewinds. To stop winding, press Z.
About cassette tapes
•Take up any slack in the tape with a pencil or similar tool before use. Slack tape may jam in the mechanism.
3Press w to start recording. cis pressed simultaneously.
When the selected function is CD, CD play and recording starts simultaneously.
To record only the selected tracks of a CD
1Follow steps 1 to 3 of “Programmed Play” to program tracks.
2Press w.
To stop recording, press Z. To stop CD play, press s.
To pause recording, press a. To resume recording, press again.
To erase recording, press wwhile the power is off.
After recording, press POWER6STANDBY to turn the power off.
7
7 | 11/21/00, 10:26 AM |
