Aiwa SX-WNA555, SX-C605 manual Press TUNER BAND repeatedly to select the desired band, English

TUNER

BAND

1 Press TUNER BAND repeatedly to select the desired band.

FM — AM

r-

When TUNER BAND is pressed while the power is off, the power is turned on directly.

2 Press + DOWN or - UP to select a station.

Each time the button is pressed, the frequency changes. When a station is received, “TUNE is displayed for 2 seconds. During FM stereo reception, (l@Il] is displayed.

TUNE [(lam]]

When an FM stereo broadcast contains noise

Press MONO on the remote control so that “MONO appears on the display.

Noise is reduced. althouah recerXion is monaural.

To restore stereo receptfin, repeat the above so that “MONO disappears.

To change the AM tuning interval

The default setting of the AM tuning interval is 10 kHz/step. If you use this unit in an area where the frequency allocation system is 9 kHz/step, change the tuning interval.

Press POWER while pressing -.

To reset the interval, repeat this procedure.

m

When the AM tuning interval is changed, all preset stations are cleared. The preset stations have to be set again.

,,:=- - ~,,

~g$~

&

1*$ t. #~&$

~“~~

3,,,@‘,>. $&&a ,’$~

. .

Z

o

-,,

,g =?,? yi

/g ,r

~=, w ,, &

I

~:gj

if VI! * ??

1! “

4

&

To search for a station quickly (Auto Search)

Keep + DOWN or ~ UP pressed until the frequency starts to change rapidly. After tuning in to a station, the search stops. To stop the Auto Search manually, press ++ DOWN or - UP.

●The Auto Search may not stop at stations with very weak signals.

ENGLISH 11