II

The unit can be turned on at a specified time every day with the built-in timer.

Preparation

Make sure the clock is set correctly.

1 Press one of the function buttons to select a source.

If TUNER BAND is pressed, the band cannot be selected in this step.

2 Press TIMER repeatedly until @ appears on the display.

Time and audio source name flash alternately.

o

3 Within 6 seconds, turn MULTI JOG to designate the timer-on time, then press ENTER or II.

Turning MULTI JOG changes both the hour and the minute.

++or - is also available instead of MULTI JOG. Holding these buttons down will vary the time rapidly.

4 Within 4 seconds, turn MULTI JOG to select the duration for the timer-activated period.

The duration can be set between 5 and 240 minutes in 5 minute steps.

++or ~ is also available instead of MULTI JOG.

The duration will be automatically set after 4 seconds. It will also be set if ENTER or 1I is pressed within 4 seconds after step 4.

5 Adjust the volume.

The source sound will play at the volume level set in this step when the power is turned on by the timer.

If the volume level is set to 21 or higher, however, it will automatically be set to 20 when the power is turned on.

6 Prepare the source.

To listen to a CD, load the disc to be played first on tray 1. To listen to a tape, insert the tape into deck 1 or 2.

To listen to the radio, tune in to a station.

7 Press POWER to turn off the power.

When the timer-on time is reached; the unit turns on and begins play with the selected source.

m

You can change the source that was selected in step 1 by pressing one of the function buttons before pressing ENTER or II in step 3.

To check the timer setting

Press TIMER.

The selected source, the timer-on time, and the duration for the timer-activated period will be displayed for 4 seconds.

To change any of the previous setting

Carry out from step 1,

However, if you do not change the timer-on time, in step 3 just press ENTER twice and continue from step 4.

To cancel the timer standby mode temporarily Press TIMER repeatedly so that O disappears.

To restore the timer standby mode, press” again to display ~.

Using the unit while the timer is set

You can use the unit normally after setting the timer. Before turning off the power, -carry out st;p 5 and 6.

m

Timer playback and timer recording will not begin unless the power is turned off.

Connected equipment cannot be turned on and off by the built- in timer of this unit. Use an external timer,

Timer recording is applicable for TUNER and VI DEO/AUX (with an external timer) sources only.

Press either TUNER BAND or VIDEO/AUX to select a source, then press TIMER repeatedly until @ flashes on the display. Within 6 seconds, carry out the steps of “SETTINGTHE TIMER” from step 3 and insert the tape to be recorded on into deck 2 after step 6.

When the power-economizing mode (page 9) has been turned on, the timer recording volume level will be O (minimum level).

You cannot use the timer function to record from a CD or tape.

o

ENGLISH 25

Page 25
Image 25
Aiwa SX-WNA555 Press one of the function buttons to select a source, Press Timer repeatedly until @ appears on the display

SX-WNA555, SX-C605 specifications

The Aiwa SX-WNA555 and SX-C605 are remarkable audio devices that combine advanced technologies with elegant design to deliver an exceptional listening experience. Both models represent the pinnacle of Aiwa's commitment to sound quality and user convenience, making them an excellent choice for audiophiles and casual listeners alike.

The Aiwa SX-WNA555 is a compact yet powerful wireless speaker that showcases impressive sound capabilities. One of its standout features is its seamless integration of Wi-Fi and Bluetooth connectivity, allowing users to stream music effortlessly from their smartphones, tablets, or computers. This versatility ensures that users can enjoy their favorite tracks from various sources without any hassle.

Additionally, the SX-WNA555 utilizes high-fidelity audio technologies that enhance sound clarity and depth. The built-in digital signal processor (DSP) optimizes audio playback, providing rich bass and crisp highs, while the speaker's design minimizes distortion, making it suitable for any genre of music. With a range of customizable EQ settings, users can fine-tune their listening experience to suit their preferences.

On the other hand, the Aiwa SX-C605 is a more traditional stereo speaker system that excels in delivering robust sound in larger spaces. Its dual 6.5-inch woofers and high-performance tweeters work in harmony to produce a balanced sound profile, making it perfect for both music and movies. The SX-C605 is equipped with a powerful amplifier that ensures adequate power output, resulting in an immersive audio experience.

One significant characteristic of the SX-C605 is its stylish design, featuring a sleek finish that blends well with any home decor. The robust build quality of these speakers ensures durability, while rear-firing bass ports enhance low-frequency performance, catering to the needs of bass enthusiasts.

Both models boast user-friendly interfaces, with intuitive controls that make navigation effortless. Complementing their audio capabilities, the Aiwa SX-WNA555 and SX-C605 are designed to be energy-efficient, ensuring minimal power consumption without compromising sound quality.

In conclusion, the Aiwa SX-WNA555 and SX-C605 represent the innovative spirit of Aiwa, providing sophisticated sound solutions that cater to diverse listening needs. Whether through wireless streaming or traditional stereo setups, these speakers deliver an audio experience that is both engaging and enjoyable, making them standout choices in the competitive audio market.