Transmitted beam effective area

15°

5m

30°

15°

30

°

Remote sensor

 

 

 

When using the remote control, be sure to point it at the remote sensor. The above illustration shows the approximate transmitted beam effective area for indoor use.

The transmitted beam may not be effective or may cause incorrect operation outdoors or when the remote sensor is directly exposed to sunlight or powerful lighting.

 

 

 

EN

 

65

 

 

 

 

 

 

 

 

 

FEATURE:

Self-Timer, Animation and Time-Lapse

 

PURPOSE:

The remote control lets you set/release

 

 

Interval Timer and Rec Time functions

 

 

as well as the Menu Screen.

 

OPERATION:

Self-Timer

 

 

1) Set

 

 

Instead of performing steps 1 through

 

 

4 on pg. 40 (“Self-Timer”), press INT.

 

 

TIME on the remote control. Each

 

 

time INT. TIME is pressed, the

 

 

Interval Timer indicator appears,

 

 

changing in the following order: 15S,

 

 

30S, 1MIN, 5MIN and No indication

 

 

(off).

 

 

2) Release

 

 

Instead of setting “INT. TIME” to

 

 

“OFF” in the Menu, press INT. TIME

 

 

on the remote control until the

 

 

Interval Timer indicator disappears.

 

 

Animation

 

 

1) Set

 

 

Instead of performing steps 1 and 2

 

 

on pg. 41 (“Animation”), press REC

Interval Timer Indicator

 

1MIN

INDEX

 

1 2S

 

 

 

 

 

 

LCD monitor or viewfinder

Index Code Marking

TIME on the remote control. Each

time REC TIME is pressed, the Rec

Time indicator appears, changing in

the following order: 1/4S, 1/2S, 1S,

5S and No indication (off).

2) Release

Instead of using the Menu in step 5

on pg. 41, press REC TIME on the

remote control until the Rec Time

indicator disappears.

Time-Lapse

Rec Time Indicator

START/STOP

VISS

INT. TIME

REC TIME

RM-V709U (provided)

 

1) Set

 

Instead of performing steps 1 through

 

3 on pg. 41 (“Time-Lapse”), press

 

INT. TIME and REC TIME on the

 

remote control. Each time INT. TIME

 

is pressed, the Interval Timer

 

indicator appears, changing in the

 

following order: 15S, 30S, 1MIN,

 

5MIN and No indication (off). Each

 

time REC TIME is pressed, the Rec

 

Time indicator appears, changing in

 

the following order: 1/4S, 1/2S, 1S,

 

5S and No indication (off).

 

2) Release

 

Instead of using the Menu in step 5

 

on pg. 41, press INT. TIME and REC

 

TIME on the remote control until the

 

indicators disappear.

NOTE:

Also refer to pgs. 40 and 41.

 

 

FEATURE:

Index Code Marking

PURPOSE:

To give you automatic access to any

 

selected point on a recording.

OPERATION:

1) Press VISS once to place the index

 

code. “INDEX” blinks during

 

marking.

NOTE:

If VISS is pressed during Record-

 

Standby mode, the mark is placed

 

where START/STOP is pressed.

Page 65
Image 65
JVC GR-AXM500 specifications Transmitted beam effective area, Interval Timer Indicator, Rec Time Indicator