28EN

[Ex. : Fader]

VIDEORECORDING

Fade/Wipe

AdvancedFeatures(cont.)

Fade-in

Fade-out

Function indication

 

 

 

 

 

LCD monitor or

 

4EFFECT

 

 

MOSAIC

 

 

 

viewfinder

 

 

 

 

 

 

 

 

 

 

 

 

 

After 2 sec.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BK

BK FADER

 

 

 

 

 

MOSAIC

OFF

 

 

 

 

 

 

 

 

 

 

(No indication)

 

SHUTTER

 

 

 

 

 

SLIDE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OFF

 

 

 

 

 

 

These effects let you make pro-style scene transitions. Fade- or wipe-in works at recording start, and fade- or wipe-out works at recording end or when you enter Record–Standby mode.

ENGAGE FADE- OR WIPE-

STANDBY MODE

1 Press EFFECT to cycle through the modes as shown at left. Once the desired mode appears, it is selected and reserved.

•The selected mode’s name and its indication are displayed for approx. 2 seconds. Then the name disappears, and only the indication remains.

START OR END RECORDING

2 Press Recording Start/Stop Button to activate fade-in/ out or wipe-in/out.

TO CANCEL FADE- OR WIPE- STANDBY MODE

3 Press EFFECT repeatedly until “OFF” appears.

•“OFF” is displayed for approx. 2 seconds and the fade/wipe-standby mode is canceled.

BK Fader

Fades in/out to a black screen.

Mosaic (Fader)

Gradually turns/returns the picture into/from a mosaic pattern.

Shutter (Wipe)

A black screen moves in from the top and bottom, closing over the image like a shutter, or a new image pushes open the black screen vertically from the centre.

Slide (Wipe)

A black screen moves in from the left to gradually cover the image, or a new image moves in from right to left.

EFFECT

Recording Start/Stop

Button

NOTES:

Pressing and holding the Recording Start/Stop Button allows you to record a black blank screen or a mosaic pattern if Mosaic Fader is selected.

The screen becomes slightly reddish when the Fade/ Wipe is used with Sepia (pg. 27).

With the Electronic fog filter mode (pg. 27) engaged, when Fader (not Mosaic) is used, the image fades in/out to a white screen.

Even if you start shooting with the Fade/Wipe indication displayed during Digital Still Camera Shooting, the Fade/ Wipe does not function.

Page 28
Image 28
JVC GR-AXM500 specifications Fade/Wipe, Advanced Features, Engage FADE- or Wipe Standby Mode, Start or END Recording