Aiwa SX-WNA555, SX-C605 manual Random /Repeat Play, Press CD BLANK SKIP, Press F to start playback

RANDOM /REPEAT PLAY

Use the remote control,

RANDOM play

All the tracks on the selected disc or all the discs can be played randomly.

REPEAT play

A single disc or all the discs can be played repeatedly.

Press RANDOM/REPEAT.

Each time it is pressed, the function can be selected cyclically.

RANDOM play — RANDOM lights up on the display, REPEAT play — % lights up on the display. RANDOM/REPEAT play — RANDOM and ~ light upon the display.

Cancel — RANDOM and C& disappear from the display.

To ~lav all discs, press ~ to start play.

To play a single disc, press one of DISC DIRECT PLAY 1-3 to start play.

m

During random play it is not possible to skip to the previously played track with +,

1 Press CD BLANK SKIP.

“CDBLANK SKIP ON” is displayed and a small dot will appear in the display.

Small dot

2 Press F to start playback.

The silent portions between tracks will be skipped, and the sound will be played back without interruption. If a track fades out (ends with the sound gradually decreasing), the fadeout portion also will be skipped.

To return to normal playback

Press CD BLANK SKIP again, and the dot in the display will disappear.

m

“There may be a case where BLANK SKIP PLAY does not function correctly.

“BLANK SKIP PLAY is automatically canceled when performing Al EDIT RECORDING (page 18), PROGRAMMED EDIT RECORDING (page 19), or recording during PROGRAMMED PLAY (page 15) or RANDOM PLAY (page 15).

upto 30 tracks can be programmed from any of the inserted discs.

1

2

2

5

44,*

■

Use the remote control.

1 Press PRGM twice in stop mode.

“PRG”is displayed

●When the PRGM is pressed once in step 1, the unit enters the KARAOKE PROGRAM (page 23).

2 Press DISC DIRECT PLAY, then press numbered buttons 1-3 within 3 seconds to select a disc.

Go to the next step when the tray stops rotating.

3Press numbered buttons O-9 and +1 Oto program a track.

Example:

To select the 25th track, press +10, +10 and 5, To select the 10th track, press +10 and O.

	Total number of
Selected track number	selected tracks

Program number	Total playing time of
	the selected tracks

4 Repeat steps 2 and 3 to program other tracks.

5 Press - to start play.

To check the program

Each time - or - is pressed in stop mode, a disc number, track number, and program number will be displayed.

To clear the program

Press ■ CLEAR in stop mode,

To add tracks to the program

Repeat steps 2 and 3 in stop mode. The track will be programmed after the last track.

To change the programmed tracks

Clear the program and repeat all the steps again

To play the programmed tracks repeatedly

After programming the tracks, press RANDOM/REPEAT repeatedly until CL appears on the display.

●During programmed play, you cannot perform random play, check the remaining time, and select a disc or track, “CAN’T USE” is displayed if you attempt to select a track.

●“FULU is displayed if you attempt to program more than 30 tracks.

ENGLISH 15