REFERENCE

Care and maintenance

Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit.

To clean the cabinet

Use a soft and dry cloth. If the unit surfaces are extremely dirty, use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents such as alcohol, benzine or thinner.

To clean the tape heads

Dirty tape heads cause sound deterioration. After every 10 hours of use, clean the tape heads by using a commercially available dry-type or wet-type head cleaning cassette separately. Refer to the instructions of the cleaning cassette.

To demagnetize the tape heads

Use a demagnetizing cassette after every 20 to 30 hours of use. Refer to the instructions of the demagnetizing cassette.

Care of CDs

When a CD becomes dirty, wipe it from the centre out with a cleaning cloth. Please, do not use solvents. After playing a CD, store it in its case. Do not expose a CD to direct sunlight or heat sources.

Care of tapes

Store tapes in their cases after use. Do not leave tapes near magnets, motors, television sets, or any source of magnetism. Do not expose tapes to direct sunlight, or leave them in a car parked in direct sunlight.

Troubleshooting

If your unit fails to perform properly, check the following guide and the relevant sections of the Operating Instructions.

First check that the AC power cord and the speakers are connected correctly and firmly.

Should any problem persist, consult your nearest Aiwa dealer.

General

There is no sound

•Are the speakers and AC power cord connected properly? •Turn VOLUME clockwise and hold.

•The headphones are connected.

•Insert only the stripped portion on the speaker cord into the SPEAKERS terminal. Inserting the vinyl portion of the speaker cord will obstruct the speaker connections.

The unit shut off suddenly

•Possibly a short circuit in the speaker terminals. Disconnect the AC power cord from the AC power socket and reconnect the speaker cords correctly.

The display blacks out when the unit is turned off. •Is ECO mode set to on? (see "ECO mode" on page 7)

Erroneous display

•Reset the unit. (See "Resetting the unit" on page 19)

There is severe hum or noise.

•A TV or VCR is placed too close to the stereo system. Move the stereo system away from the TV or VCR.

The clock indication does not show the correct time. •A power interruption occurred. Set the clock and timer

settings again.

The clock setting/radio presetting/timer is cancelled. •The AC power cord is disconnected or a power failure occurs

longer than half a day. Redo the following:

-"Setting the clock" on page 7

-"Preset tuning" on page 10

If you have set the timer, also redo "Timer playback/ recording" on page 16 and 17.

The timer does not function.

•Set the clock correctly.

The remote does not function.

•There is an obstacle between the remote and the unit. •The remote is not pointing in the direction of the unit's

sensor.

•The batteries have run down. Replace the batteries.

Tuner

Poor reception

•Check antenna connection. Adjust the antenna to find the best reception.

•For FM, move the FM antenna to reduce the noise. •For AM, re-rotate the AM antenna to reduce the noise. •Move the unit and antenna away from other electric

appliances and cords.

18

Page 18
Image 18
Aiwa XR-FA500 manual Reference, Care and maintenance, Troubleshooting, General, Tuner

XR-FA500 specifications

The Aiwa XR-FA500 is a notable stereo system that captured the attention of audiophiles and casual listeners alike with its impressive features and technologies. Known for its compact size and powerful performance, this all-in-one audio solution integrates various functionalities into a single device, making it suitable for diverse audio needs.

One of the standout features of the XR-FA500 is its robust amplifier output, which delivers clear and powerful sound without distortion. It supports a wide frequency response, ensuring that both low and high notes are reproduced accurately, providing an immersive listening experience that appeals to all genres of music.

In terms of connectivity, the Aiwa XR-FA500 is equipped with multiple input options, including auxiliary inputs, allowing users to connect external devices such as smartphones, tablets, and computers. This versatility makes it easy to play digital music libraries or stream audio wirelessly using Bluetooth technology. The inclusion of a built-in CD player also caters to those who still enjoy their physical music collections, offering convenience and ease of use.

The system’s design is sleek and modern, featuring intuitive controls that enhance user experience. The digital display provides clear information about the current track, volume level, and other settings, making it easy for users to navigate through their audio experience.

Moreover, the XR-FA500 incorporates advanced sound processing technologies, such as equalization presets, that allow users to customize their audio output according to their preferences. Whether listening to classical, rock, or pop music, users can tailor the sound profile to match their musical taste.

Another notable aspect of the Aiwa XR-FA500 is its built-in FM/AM tuner, which offers access to a wide range of radio stations. With preset options, users can quickly switch between their favorite channels, providing yet another layer of entertainment.

In terms of build quality, the XR-FA500 is well-constructed, ensuring durability and longevity. While compact, it is designed to deliver exceptional sound quality, making it an excellent choice for small to medium-sized rooms.

Overall, the Aiwa XR-FA500 exemplifies a balance of performance, versatility, and user-friendly design, making it an excellent addition to any audio enthusiast's setup. Whether it’s used for casual listening, parties, or focused music enjoyment, the XR-FA500 delivers impressive sound and a multitude of features that enhance the overall audio experience.