RADIO OPERATIONS
RDS | TUNER/ |
|
BAND | TUNER | |
|
| |
|
| MODE |
f,g
TUNER/
BAND
SHIFT
CLEAR
PRESET N,M, f,g,
ENTER
Automatic presetting
Scans the receivable frequency range and stores tuned stations automatically with the preset number.
1 | Press TUNER/BAND. |
2 | Hold down RDS for 2 seconds until |
| "AUTO PRESET" scrolls in the display. |
3 | Press ENTER on the remote. |
| If ENTER is not pressed within 6 seconds, automatic |
| presetting is not activated. |
| The tuning indicator is displayed and scanning begins |
| with the FM band. |
| The frequency and the preset number (beginning from 1) |
| will be displayed when a tuned station is stored. |
Manual tuning
1Press TUNER/BAND repeatedly to select a band. The unit switches to the tuner from any other function and alternates between FM and AM.
2Press for grepeatedly to tune in a station. "TUNE" is displayed when a station is tuned in. "1" is displayed for FM stereo reception.
To search for a station automatically (Auto search) Hold down for g.
The unit searches for a station and stops at reception. To stop the search manually, press for g.
•Auto search may not stop at stations with weak signals.
Preset tuning
Preset your favourite stations by either of the following ways ("Manual presetting" or "Automatic presetting") and tune them in directly by using preset numbers.
Manual presetting
1Tune in the desired station.
2Press ENTER on the remote to store the station. The preset number, beginning from "1" flashes in the display.
3Repeat steps 1 and 2 to preset other stations. The next station will not be stored if a total of 32 preset stations have already been stored. ("FULL" is displayed.)
•If power is interrupted for more than approximately 12 hours, all settings stored in memory after purchase need to be reset.
The display will return to the first stored station when |
scanning is finished. |
•The unit scans the AM bands if preset numbers are still available.
•Automatic presetting clears all the previously stored preset stations.
•If identical RDS stations with alternative frequencies are detected, only the station with the stronger signal is stored.
10
