ADJUSTMENTS BEFORE OPERATION
POWER | ECD, | POWER |
|
6STANDBY/ON | TUNER/ |
|
|
ECO | BAND, | CLOCK |
|
dTAPE, |
| ||
|
| ||
| AUX |
|
|
|
|
| ENTER |
| f,g ECD, | f,g | |
|
| TUNER/ | |
|
| BAND, |
|
|
| dTAPE, |
|
|
| AUX |
|
SHIFT
DIMMER
Setting the clock
1 | In stop mode, hold down SHIFT and press CLOCK |
| on the remote. |
| Go to step 3 when the hour of the clock display flashes. |
2 | Within 6 seconds, press ENTER. |
| The hour flashes in the display. |
3 | Press f or g to set the hour, then press |
| ENTER. |
4 | Press for gto set the minute. |
| Each press changes the time in |
5 | Press ENTER. |
| The time display stops flashing and the clock starts from |
Power
Turning the unit on
Press POWER 6STANDBY/ON (POWER on the remote ). Alternatively, press dTAPE, TUNER/BAND, AUX or ECD. Playback will start automatically if a disc or tape is loaded.
Turning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
Dimmer
The display window brightness can be selected.
Press DIMMER on the remote repeatedly.
Each press of the button changes the following three levels: "DIMMER 1", "DIMMER 2" and "DIMMER 0". "DIMMER 0" is brightest.
ECO mode
Reduces power consumption in standby mode with the following operations.
Press ECO.
Each press of the button changes the mode as follows;
ECO ON: Power economizing mode is activated.
When the unit turns off, everything in the display disappears and only the red indicator above POWER lights to show that the power is being supplied.
ECO OFF: Power economizing mode is cancelled. When the unit turns off, the clock display appears.
Initial mode is ECO OFF.
Standby power consumption
ECO ON: 0.3 W
ECO OFF: 10 W
00 seconds. |
To display the time while the power is on
Hold down SHIFT and press CLOCK on the remote. The time will be displayed for 6 seconds.
Tip:
''AM 12:00" indicates midnight and "PM12:00" noon.
If "- -:- -" appears when the unit is turned off
There has been a power interruption. Reset the clock.
7
