Operation
English - 32

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable
channels. After the available channels are memorized, use the CH and CH buttons to scan
through the channels. This eliminates the need to change channels by entering the channel digits.
There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels
(automatic) and adding and deleting channels (manual).
1Press the MENU button.
Press the …or †button to
select “Channel”, then press
the ENTER button.
2Press the ENTER button to
select “Antenna”.
Press the …or †button to
select “Air” or “Cable”, then
press the ENTER button.
3Press the …or †button to
select “Auto Program”, then
press the ENTER button.
NOTE
•All available DTV and analog channels are automatically stored
in memory.

Selecting the Video Signal Source

Before your television can begin memorizing the available channels,
you must specify the type of signal source that is connected to the TV
(i.e., an antenna or cable system).
Channel
Antenna : Cable
Auto Program
Add/Delete
Favorite Channels
Name
Fine Tune
Signal Strength
LNA : Off
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
Channel
Antenna : Air
√
Auto Program
√
Add/Delete
√
Favorite Channels
√
Name
√
Fine Tune
√
Signal Strength
√
LNA : On
√
Move Enter
Return
Input
Picture
Sound
Channel
Setup
Guide
Channel
Antenna : Air
√
Auto Program
√
Add/Delete
√
Favorite Channels
√
Name
√
Fine Tune
√
Signal Strength
√
LNA : On
√
Move
Enter
Return
Input
Picture
Sound
Channel
Setup
Guide
Air
Cable
BP68-00548A-00Eng(030~051) 9/12/05 9:38 AM Page 32