AKG Acoustics WMS 400 Akg Wms Uhf Vocals, Rack mounting, Antennas, AF LEDs, ON/OFF switch, Rf Led

AKG WMS UHF VOCALS

Rack mounting

Both the SR 40 and the SR 40 diversity can be used free- standing or rack mounted. An optional rack mounting kit allows you to install the receiver quickly and easily in any 19" rack. The half-rack, 1 U case lets you mount the recei- vers for six channels in just 3 U of rack space.

Antennas

The swiveling antennas are mounted on the front panel, allowing the receiver to be rack mounted.

AF LEDs

The green AF LED indicates the input level to the audio section is within the optimum range. If the audio input level is too high, the PEAK LED will come on.

SR 40 diversity Receiver

ON/OFF switch

with status LED.

RF LED

Illuminates to indicate that RF signal is being received. If the RF signal fails or the squelch comes on, the MUTE LED will be lit.

Alternative receivers

Diversity LEDs

Indicate which of the two receiving anten- nas is currently active.

Frequency color code platelet

Receivers using the same frequency are mar- ked with the same color code.

Case

The 1 U half-rack case is easy to mount in a rack and allows you to install two receivers in a single slot.

Volume

Matches the output level of the receiver to the input gain of the mixer. (For details refer to page 27).

You can also use the PT 40 with the SR 40 stationary receiver or the PR 40 portable receiver.

C 420 L

A fully adjustable behind-the-neck steel headband with swiveling temple pieces provides a secure yet gentle fit.

The cable is connected at the back of the head so it won't get into the user's way during the performance.

The microphone arm places the mic in front of the user's mouth, a position suited for professional vocalists who know how to sing and breathe to avoid causing breath and pop noise.

www.akg.com 15