Alamo 3109 manual Attaching Pin on Bucket

ASSEMBLY

ASSEMBLY

Attaching Pin on Bucket

Always wear safety glasses when removing or installing buckets.

Always use a drift and hammer made of non-sparking material (a shot-filled mallet is recommended) to install or remove pins. A steel hammer or drift could generate flying metal fragments and result in injury. Always wear safety glasses when using a hammer to remove or install pins.

Material buckets can be installed using tools ordinarily available.

Attach bucket to lift boom frame and bucket cylinders with four 3/8” cap screws and 3/8” lock nuts (supplied with loader).

Attach bucket leveling rod (supplied with loader) through hole in right outside bucket ear. Secure with cotter pin.

3109 01/11 Assembly Section 3-8

© 2011 Alamo Group Inc.