OPERATION
1.Standard Equipment and Specifications
Specifications will vary with tire size, hydraulic system and bucket used. Specifications are given for a loader equipped with a 68” pin on bucket, external hydraulic system of 10 GPM with engine operating at 2600 RPM and relief setting of 2500 PSI.
Horsepower Range | ||
System pressure/flow rate | 2500 PSI/ 10 GPM | |
Lift Capacity to maximum height | 1320 lbs. | |
Breakout force at pivot pin | 4410 lbs. | |
Rollback force at ground line | 3030 lbs. | |
Total weight with bucket (approx.) | 980 lbs. | |
Raising time to full height | 4.97 seconds | |
Lower time | 3.42 seconds | |
Attachment dump time | 2.47 seconds | |
Attachment rollback time | 3.19 seconds | |
Hydraulic system flow | 10 GPM | |
System pressure at rated flow | 2500 PSI | |
(A) | Maximum Lift Height at Pivot Pin | 111” |
(B) | Maximum Height Under Bucket | 107 |
(C) | Clearance with Bucket Dumped | 93” |
(D) | Reach at Maximum Height | 24” |
(E) | Maximum Dump Angle | 42° |
(F) | Reach with Attachment on Ground | 62” |
(G) | Attachment Rollback Angle | 20° |
(H) | Digging Depth | 5.5” |
(I) | Overall Height in Carry Position | 56” @ top of upright |
(Manufacturers estimated specifications and design subject to change without notice.)
3109 01/11 | Operation Section |
© 2011 Alamo Group Inc.
OPERATION
