Alamo 3109 manual Mount Assembly

(SG-15)

OPERATION

Do not operate this Equipment with hydraulic oil or fuel leaking. Oil and fuel are explosive and their presence could present a hazard. Do not check for leaks with your hand! High-pressure oil streams from breaks in the line could penetrate the skin and cause tissue damage including gangrene. To check for a hose leak, SHUT the unit ENGINE OFF and remove all hydraulic pressure. Wear oil impenetrable gloves, safety glasses and use Cardboard to check for evidence of oil leaks. If you suspect a leak, REMOVE the HOSE and have it tested at a Dealer. If oil does penetrate the skin, have the injury treated immediately by a physician knowledgeable and skilled in this procedure.

Before operation, a complete inspection and service is required to ensure the loader is in a good and safe

working condition. Damaged and/or broken parts should be repaired and/or replaced immediately. To ensure the loader is ready for operation, conduct the following. OPS-L-0027

The operator’s manual and safety signs affixed on the unit contain important instructions on the safe and proper use of the equipment. Maintain these important safety features on the implement in good condition to ensure the information is available to the operator at all times.

•Ensure the manual canister is secured to the equipment with the operator’s manual inside.

•Ensure all safety signs are in place and legible. Replace missing, damaged, and illegible decals. OPS-U- 0011

MOUNT ASSEMBLY

•Inspect condition of mounting frame weldment.

•Ensure all bolts and screws are in position and are properly torqued.

•Ensure all pins are in place and fastened with screws.

•Ensure frame is properly mounted to tractor and hardware is properly installed and tightened. OPS-L-0004_A

Mount Frame Assembly

3109 01/11 Operation Section 4-13

© 2011 Alamo Group Inc.

OPERATION