ASSEMBLY
Installing Quick Attach Device
Always use a drift and hammer made of non-sparking material (a shot-filled mallet is recommended) to install or remove pins. A steel hammer or drift could generate flying metal fragments and result in injury. Always wear safety glasses when using a hammer to remove or install pins.
1.Fasten quick attach device to lower boom arms and bucket tilt cylinders using anti-rotation pins, 3/8” x 3/4” shoulder bolts, and 3/8” lock nuts (supplied with loader). Figure Asm-L-0014.
2.Attach bucket leveling rod indicator (supplied with loader), to outside of right ear on quick attach as shown. Figure Asm-L-0014.Secure bucket leveling rod indicator with two 1/8” x 1” cotter pins (supplied with loader).
3109 01/11 | Assembly Section 3-10 |
© 2011 Alamo Group Inc.
